Professionally installed interior drainage that manages groundwater and hydrostatic seepage before it reaches your finished floor or stored belongings.
Effective, proven, and installed without disturbing your yard or exterior features.
All work is performed from inside the structure, preserving driveways, gardens, and exterior features.
Perimeter channels capture water as it enters at the floor-wall joint and route it to a sump pit before it can spread across the basement floor.
Interior drainage is not weather-dependent. Installation can proceed in winter months when exterior excavation and membrane work are not feasible in Gresham, OR conditions.
Gravity-fed channel designs minimize pump cycling frequency, extending pump service life and reducing electricity usage.
An interior drainage system addresses basement moisture by capturing and redirecting groundwater after it has entered the building envelope at the floor-wall joint or through weep holes at the base of the foundation wall. This differs fundamentally from exterior waterproofing, which prevents water from reaching the wall surface. Interior drainage accepts that water will enter under certain pressure conditions and provides a managed pathway for that water to reach a collection point without spreading across the basement floor or damaging finished materials. For Gresham homes where exterior excavation is impractical, cost-prohibitive, or where the moisture entry is concentrated at the perimeter footing level, interior drainage is the technically appropriate solution.
Perforated channel systems offer specific advantages over simple gravel-and-pipe installations in Gresham basements with block or stone foundations. The channel profile is engineered to sit at the footing level where hydrostatic pressure concentrates, and the wall flange extension captures seepage that occurs at the bottom course of block rather than strictly at the floor-wall joint. This distinction matters because without the wall flange, water running down the interior wall face bypasses the channel and spreads across the floor before reaching the collection point. Proper channel specification requires understanding where the moisture entry is actually occurring, which the assessment process documents before any installation begins.
The sump pit integration is the component that makes an interior drainage system fully functional. The channel system routes water to the pit, and the pump removes it from the pit before it overflows. Pit location is determined by the channel routing geometry, existing pit locations if present, and access to a discharge route. In some Gresham homes where the basement has been partially finished, the channel must be routed around finished walls and mechanicals to reach an optimal pit location. These routing decisions are made during the assessment and documented in the installation plan. The pit itself is sized to provide adequate storage volume for the expected inflow rate, ensuring the pump is not short-cycling and the system has adequate buffer during peak inflow events.
One of the most important honest assessments we provide in Gresham is explaining what interior drainage does not do. Interior systems do not treat the foundation wall itself, do not reduce hydrostatic pressure against the exterior wall surface, and do not address wall seepage that is occurring mid-wall due to horizontal cracks or structural movement. For those conditions, exterior membrane work or crack injection is the appropriate treatment. Interior drainage excels at managing water entry at the footing level, floor-wall joint seepage, and floor-level pressure seepage in situations where the foundation is structurally sound but the original waterproofing has aged or the perimeter soil conditions create chronic seepage during saturation events. We document which conditions are present in your specific Gresham basement and recommend the approach that addresses your actual moisture source, not a generic solution that covers all scenarios on paper but misses your specific entry points.
Every service performed to drainage system standards and local code requirements.
Saw-cut perimeter channel around the full basement footprint, with gravel bed, drainage channel, and sump pit connection. Complete protection for all four walls in one installation.
Learn moreFor Gresham homes where moisture entry is concentrated on one or two walls, targeted channel installation along the affected sections provides effective protection at lower cost than full perimeter treatment.
Get an assessmentThe wall flange component extends the drainage channel up behind the base of the wall to capture moisture migrating down the wall face before it reaches the floor.
Ask about wall flangesPit location decisions consider channel slope, discharge routing, basement layout, and finished area constraints. We document the reasoning for every pit placement recommendation.
Plan your pit locationExisting interior drainage channels can become clogged with sediment, mineral deposits, or root intrusion over time. We inspect, flush, and repair existing systems in Gresham homes to restore full drainage performance.
Schedule an inspectionExpansion scopes are common when a homeowner finishes additional basement space and discovers that the existing partial channel does not cover the newly used area.
Expand your systemA methodical process that produces a drainage system built to perform for decades.
We inspect the basement under controlled conditions to document exactly where and how water is entering your Gresham home. We look for staining patterns, efflorescence location, floor-joint seepage evidence, and any wall-face moisture migration. This documentation determines the channel scope and routing.
Cut dimensions are verified before the gravel bed is placed to confirm the channel profile will sit at the correct elevation relative to the footing.
Each connection point between channel sections is inspected before the next section is placed to confirm continuity and proper slope transition.
Written completion documentation is provided at handoff, including channel routing dimensions, pit specifications, and pump information for future reference.
The results our Gresham clients experience speak clearly.
The assessment was thorough and they explained exactly which wall sections were causing the problem. The installation took one day and the crew cleaned up completely before leaving. The following spring, which was wet, produced zero water on the basement floor for the first time in seven years.
Our older block foundation was not a candidate for exterior work without major landscaping disruption. The interior channel system gave us the protection we needed without touching the exterior at all. The wall flange detail they added captured the seepage that was running down the bottom block course, which was the main issue.
We had the system installed in November, which would have been impossible with exterior work given the ground conditions that time of year. The interior installation was unaffected by weather and completed in a single day. The system handled a major rain event the following week perfectly.
What you need to know to make a confident decision about interior drainage.
The installation begins with saw-cutting the basement floor slab along the planned channel route, typically four to six inches from the foundation wall. The cut follows the interior perimeter of the basement and terminates at the sump pit location. Concrete is removed and the subbase is excavated to reach the footing level, then a gravel bed is placed, the drainage channel profile is set to slope toward the pit, and the wall flange is installed where specified. New concrete is poured to cap the system and restore the floor surface. Most residential installations in Gresham are completed in a single working day for standard perimeter configurations.
The functional lifespan of an interior drainage system is largely determined by the durability of the channel material and the ongoing performance of the sump pump that removes the collected water. The channel installation itself is a permanent modification to the basement floor structure. The pump requires regular testing and periodic replacement, typically every 7 to 10 years. An interior drainage system that is properly maintained in a Gresham home can provide effective moisture management indefinitely.
We provide detailed written proposals for assessed conditions rather than phone quotes because every basement is different. We also explain whether the moisture pattern we observe is better addressed by interior drainage, exterior treatment, or a combination. Homeowners who understand the reasoning behind the recommendation make better investment decisions than those who receive a price without context.
The concrete cap poured at the end of the installation day requires 24 to 48 hours of cure time before the basement is fully returned to normal use. We advise homeowners on what activities can resume before full cure and what should wait. The sump pump is tested and operational before the crew leaves, so water management begins immediately even while the concrete finishes curing.
An interior drainage channel system requires minimal maintenance because it has no moving parts. The primary maintenance task is ensuring the sump pump connected to the system is in good working order, which involves the same inspection protocol as any pump: float switch testing, motor operation check, discharge line inspection, and battery backup readiness verification. The channel itself should be visually inspected at accessible cleanout points annually if the design includes them, or whenever pump performance changes in a way that might indicate a channel blockage. Older channel installations in some Gresham homes show calcium and mineral deposit buildup over many years, which can be addressed with periodic flushing.
Interior drainage can be installed in a finished basement, though the process requires more planning and may involve temporary disruption of finished flooring and baseboard materials along the channel route. The saw-cutting must follow the perimeter regardless of what is installed above it, so finished flooring within the cut zone will need to be removed before work begins and replaced after the concrete cap cures. Drywall along the base of finished walls is typically removed at least partially to allow the wall flange to be installed properly. We document all disruption areas in the installation plan so homeowners can arrange for finish materials before scheduling the work.
No excavation. No landscape disruption. Just a properly installed channel system that manages water at the point of entry, year after year.
Call +1-866-476-1348 for Assessment